Gallery of Previous Work
 New Remeha Boilers, Thetford.This pair of 30kW Baxi Remeha system boilers was installed to serve the heating & hot water requirements of The Old Golf House Vets, in Thetford. They are serviced annually. |  New boiler installation. ThetfordTo insulate the 30 year old radiators from the high pressure circuit that the new boilers need, a 60 plate secondary heat exchanger was installed. |  Abrey Farms, Remeha boiler installThis combination boiler was installed in the loftspace of one of the estate bungalows. The pipework was insulated against frost when installation was completed. |
|---|
 New Boiler, BrandonThis customer wanted the pipes to be as neat as possible, so a special boxing was constructed for the compound bent pipes to be installed in. |  New Boiler, BrandonThe boxing/jig formed part of the structure of the boiler cupboard. |  Pipe boxing/jig BrandonThe pipes align perfectly where they penetrate the ceiling. |
|---|---|---|
 Pipe boxing/jig BrandonThe jig was constructed on site during the installation of the boiler. |  Pipe boxing/jig BrandonThe angles took some careful working out! |  Remeha Boiler transplant near EcclesMuch of the existing pipework was retained in this boiler replacement. This is one of a very few boiler transplants that was completed in one day. |
 Barnham pipes. Near Thetford.The beauty of the new installation technologies: 22mm Hep2o barrier flow and return pipework, threaded through joists below a landing floor. Not too many years ago, these joists would have had to be notched, seriously weakening them. |  Dangerous cooker. Thetford.Occasionally a dangerous appliance is discovered during a Gas Safety Inspection. Whether the customer likes it or not, the gas installer has a legal responsibility to shut the appliance down. A more difficult part of an otherwise enjoyable profession! |  Dangerous gas cooker. Thetford.Thankfully a rare sight. This gas cooker could have killed. Surprisingly, the customers needed sone convincing that this was a danger to them! |
 Boiler BreakdownHRM Wallstar boilers are one of the best oil appliances on the market and manufactured locally. Their staff are brilliant and could not be more helpful. Like all boilers though, they still require regular servicing and occasionally boiler repairs will be required. |  HRM Wallstar boiler serviceA thorough service of an oil boiler will take at least 45 minutes. This is the view of the inside of the combustion chamber door, before cleaning. |  HRM Wallstar boiler serviceLooking into the part of the boiler which is installed through the wall. This is quite heavily sooted and overdue a service. If left much longer the sooting would contaminate the burner and prevent ignition. |
|---|---|---|
 HRM Wallstar boiler serviceA view of the same burner door inside face, after cleaning. This gives an accurate representation of the standard of work. All of the internal components and surfaces are cleaned like this, the nozzle is then replaced and the combustion efficiency is checked with a flue gas analyser. |
 Stanford Rd ThetfordAfter new plasterboard was installed, the walls were filled. Filler is wet in this picture, but after it had dried it was virtually impossible to see where the wall had been opened up. Then a second coat of filler was installed and the wall was painted with professionally colour matched paint, and it was impossible to tell that the work had taken place. |  Heating Repair, ThetfordLarge sections of this wall needed to be removed and re-instated to find a blockage in the pipework. When all was finished, it wasn't possible to tell what had happened. |  Stanford Road, ThetfordThe ceiling after the first coat of filler. |
|---|---|---|
 Stanford Road, ThetfordLarge parts of the wall needed to be cut out to find the blocked section of pipe, and then replaced. |  Stanford Rd ThetfordThis customer had a radiator which, despite the fact that the house was brand new, had never got warm. A kinked flow pipe to the radiator was correctly diagnosed and after some hours exposing the pipework by cutting away the chipboard walls, the pipework was replaced……. |  Stanford Rd Thetfordthe pipes were replaced from the ceiling cavity |
 Worcester boiler install. Mundford.We were recommended to this customer, a retired building contractor for this installation, in his own, very desirable, home. This Worcester floor standing oil boiler provided the heat for the underfloor heating and unvented hot water cylinder. |  Worcester boiler install. Mundford.Unvented hot water cylinder and underfloor heating system manifold. |
 Annual Servicingis necessary to keep a gas burner working safely. A typical healthy flame across a boiler burner will look like this. No yellow or floppy flames. |  corner pipeworka lot going on in one corner? this is the flow and return to a radiator circuit and a gas pipe for the boiler, all vying for space in the same corner. |  Worcester. MundfordA high level horizontal flue terminal was installed to ensure that condensation from the flue was never going to be a problem. |
|---|---|---|
 Worcester. MundfordA lot of pipework in a small space doesn't have to be untidy. |  Worcester. MndfordThe finished result was one that the customer was very satisfied with, the company could be proud of and the retired builder, whose house this installation was in, was only to happy to recommend us for future work. |  Worcester. MundfordThe room available was very limited. |
Worcester. MundfordThe finished job justifies the trouble taken. |  Worcester. MundfordIn this photo are the underfloor heating controls and manifold connections, secondary pump, air bleed valves, scale reducer, pressure relief valve and pipework and expansion vessel for the secondary water. | Boiler breakdown Repairscan be avoided with regularly scheduled maintenance. |
 Oil burner service, WrethamThis particular burner was causing great problems with incomplete combustion and required an unusually time consuming strip down service to find the problem |